Human Touch Perfect Chair PROZero PC8500 - Page 4

5
humantouch.com
4
Unpack the box
get ready
Your Human Touch
®
Perfect Chair
®
requires some simple assembly. Simply
attach the backrest to the chair base, the headrest to the backrest, place the
head pillow, and you’re done!
5
Chair base Backrest
Head pillowHeadrest
INSTALL THE BACKREST
PLACE THE HEAD PILLOW
1.Usingtwopeople,liftthebackrestintopositionontopofthechairbase,aligningthetracksonthesidesof
the backrest with the brackets on the chair base.
2. Lower the tracks on the sides of the backrest carefully onto both brackets simultaneously, keeping the
backrest level, until the backrest clicks into place.
Position the head pillow in the desired location, with the flap
resting on top of the headrest. The weighted flap makes it easy
to position the head pillow for maximum comfort.
IMPORTANT: This step requires two people to prevent injury and/or damage to the backrest.
Backrest
Chair Base
Track on side of
backrest
Bracket on chair base
Allen wrench
INSTALL THE HEADREST
1. Inserttheendsoftheheadrestframeintothebackrestframe.
2. UsingtheprovidedAllenwrench,installthetwoprovidedscrewstosecuretheheadrestframe.
Headrest
Backrest
Allen wrench
ENGLISH