-9-
(3) Operating Procedures
Turn the power switch on.
The PV display shows the actual temperature in the oven.
The SV display shows set temperature.
Start
Press the “Mode” key ⑧ to enter temperature set mode. ‘TEMP’
appears in the PV display ①. Set temperature display (SV display②)
begins flashing to set desired temperature.
Press the “Mode” key ⑧ once again to enter timer mode. ‘TIME’
appears in the PV display ①. The SV display② begins flashing to
set the timer.
Default time format is Hour/ Minute(HH.MM). Other time formats
are Date.Hour / Hour.Minute / Minute.Second
(DD.HH/HH.MM/MM.SS)
‘TEMP’
‘0000’
‘TIME’
’00.00’
MUFFLE FURNACE
To Next Page
Loading...