Humanscale M/Connect 2 - Electrical Specifications; Device Dimensions and Weight; Power Adapter and Accessories; FCC and IC Compliance

ELECTRICAL SPECIFICATIONS
FCC Notice
M/Connect2 Models MC2-AXY (where X and Y can be alphanumeric or blank)
This device complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates,
uses and can radiate radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the interference by one or more of
the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
—Consult the dealer or an experienced radio/TV technician for help.
The FCC requires the user be cautioned that any changes or modications made to this device
that are not expressly approved by Humanscale may void the user's authority to operate the
equipment.
Connections to this device must be made with shielded cables in order to maintain compliance
with the Class B limits in the FCC Rules and Regulations.
Humanscale
11 E26th St
New York, NY 10010
(6 4 6) 36 7- 5110
Innovation, Science and Economic Development Canada ICES-003
Compliance Notice:
CAN ICES-3 (B)/NMB-3(B)
Dimension Hub 150mm (w) x 150mm (d) x 22.5mm (h)
Dock 191mm (w) x 90mm (d) x 23mm (h)
Weight 2.1 kg (dock and hub)
AC Power Adapter Input Voltage 90 – 264V (47-63Hz)
Output Voltage 20V (+/- 5%), 7.5A, 150W
Efciency Meets US DoE VI
Accessories Included 1x USB-C full feature cable - 1.0m in long w/. a USB-C to USB-A adapter attached
15