Humanscale QuickStand Eco - Finalize Conversion Setup

11
Step 6
Slide the right side cover upward to remove it from the post.
Install the new side cover. (Repeat this on the other side for dual monitor)
Place the top cover back on.
Step 5
Remove the top cover.
STEP 6
• Slide the right side cover upward to remove it from the post.
• Install the new side cover. (Repeat this on the other side for dual monitor)
• Place the top cover back on.
STEP 7
• Follow instructions in the “single/ dual monitor” for monitor height
adjustment, counterbalance adjustment and cable installations.
Step 7
Follow instructions in the “single/ dual monitor” for monitor height adjust-
ment, counterbalance adjustment and cable installations.