9
4.8. Sleep Mode Key — Key 9
The Sleep Mode Key lets you program a delay period, after which the unit will shut
down automatically. The maximum delay is 60 minutes.
Procedure :
a) Press once the Sleep Mode Key, Key 9 of the numeric keypad. Victor Reader
Classic + will say the delay time before shut-down or that the function is not
active.
b) Press the Sleep Mode Key again to program a shutdown delay of 15 minutes.
Each additional time you press the key, Victor Reader Classic + will add
another 15 minutes, up to a maximum total of 60 minutes. After that, pressing
the Sleep Mode Key starts the cycle over.
Note: If you wait more than 10 seconds before pressing the 9 Key, Victor Reader
Classic + automatically returns to the start of the cycle.
4.9. Confirm and Cancel — The # and * Keys
The pound (#) Key allows you to confirm an operation. The star (*) Key allows you to
cancel an operation.
4.10. Info — Key 0
The Info Key gives direct access to various items of information. There are two ways to
access the desired information.
Procedure (1):
Press the Info Key, Key 0 of the numeric keypad. Victor Reader Classic +
will list all the available items.
Procedure (2):
a) Press the Info Key, Key 0 of the numeric keypad.
b) Press Key 4 or Key 6 of the numeric keypad to move from one item to
another.
c) To cancel an operation in progress, press the * Key.
4.10.1. Available Information Items
⇒ Number of pages and total time.
Victor Reader Classic + says the number of pages and total play time of
the book.
To Next Page
Loading...
