Inspection, care and maintenance
261
Lubrication
1
2
3
4
5
6
7
8
Platform gate hinges
Fig. 21 Side platform gates
1 Hinges, bolted
Disassemble the side platform gates.
Clean the hinges (Fig. 21/1) with a
clean, dry cloth.
Grease the running surfaces of the
hinges.
Assemble the side platform gates.
Fig. 22 Platform gate hinge, secured
1 Hinges, welded
2 Safety split pin
If necessary, replace the safety split
pin.
Container locking point
Fig. 23 Lubricating thread
1 Threaded bolt
Clean the threaded bolt with a clean
cloth.
Lubricate the thread (Fig. 23/1) with
machine grease.
Screw the locking point in and out
several times.
This distributes the grease.
Clean the excess lubricant with a
cloth.
1
W - 064
1
2
1
To Next Page
