1-4
To set your memory seat, mirrors and radio station
presets, do the following:
1. Adjust the driver’s seat (including the recliner,
lumbar and side wing area), both outside mirrors and
the radio station presets to your preference. See
“Mirrors” and “Radio” in the Index to learn how to
adjust your mirrors and set the radio station presets.
2. Press and hold the 1 or 2 (for driver 1 or 2) button
of the memory control for three seconds. A double
chime will sound to let you know that the position
has been stored.
To repeat the procedure for a second driver, follow the
preceding steps, but press the other number of the
memory control. The memory feature only works when
the transmission is in PARK (P).
To recall memory seat, mirror positions and radio station
presets, make sure your vehicle is in PARK (P), then
press the 1 or 2 button of the memory control. You will
hear a single chime ring to let you know the memory
position will be recalled
If you use the unlock button on the keyless entry
transmitter to enter the vehicle, the preset driver’s seat,
mirror positions and radio station presets will be
recalled if programmed in the Driver Information
Center (DIC). The numbers on the back of the
transmitters, 1 or 2, correspond to the numbers on
the memory control.
The preset driver’s seat, mirror positions and radio
station presets will also be recalled when inserting the
key into the ignition if programmed in the Driver
Information Center (DIC). See “Seat Position Recall”
in the Index for more information.
To stop movement of the memory seat feature at any
time, press one of the memory buttons or power
seat controls.
To Next Page
Loading...
Need help?
General
