Getting to Know Your H2
16
Memory Positions for Driver’s
Seat, Mirrors, Radio and Climate
Controls
Use the driver’s
door mounted
controls to:
• Adjust driver
seat, including
lumbar adjust-
ment
• Adjust the outside rearview mirrors
• Set the radio presets and climate
control temperature
• Press and hold Memory 1 or 2 until
two chimes sound (about four
seconds)
•To set up for another driver, repeat
the process with the other memory
button
These settings will be remembered after
they are programmed by pressing the
Memory 1 or 2 button on the driver’s
door (shown above). If you unlock the
vehicle with the Remote Keyless Entry
(RKE) transmitter, the vehicle memory
settings will correspond to the number
on the RKE transmitter: 1 or 2.
Please note that these settings will only
be recalled with the vehicle in park.
See Section 2 of your Owner Manual.
Memory Settings for Your
Vehicle (Driver Information
Center)
Your vehicle may be programmed with
these additional features:
• Alarm Warning Type
• Automatic Locking/Unlocking
• Perimeter Lighting
• Remote Lock/Unlock Feedback
• Headlamps On at Exit
• Easy Exit Seat
• Display Units
• Display Language
Selection Options
To cycle through the features below, use
the Menu button ( ) located on your
steering wheel.
Use the Select button ( ) to choose
your desired setting. The last setting
remaining on the display will be the
selection of choice. Continue cycling
through the menu using the Menu button
to set other preferences.
Hummer2004_final.qxd 9/5/03 11:20 AM Page 16
To Next Page
Loading...
