Hummer H2 2005 - Memory Seat and Mirrors; Memory Settings for Your Vehicle (Driver Information Center)

The driver’s seat
and the outside
rearview mirrors can
be programmed to
recall memory set-
tings using the
Memory Control but-
tons on the driver’s
door.
To store the memory settings:
1. Shift the vehicle into Park.
2. Adjust the driver’s seat, including the
seatback recliner, lumbar and side
wing area.
3. Adjust both outside mirrors.
4. Press and hold the 1 or 2 button of
the memory control for three seconds.
A double chime will sound.
Repeat the procedure for a second
driver and select the other Memory
Control button.
Each time button 1 or 2 is pressed with
the vehicle in Park, the memory settings
will be recalled. To stop recall movement
of the driver’s seat at any time, press
one of the memory buttons or power
seat controls.
See Section 2 of your Owner Manual.
Getting to Know Your H2
16
Memory Seat and Mirrors
(if equipped)
Memory Settings for Your Vehicle
(Driver Information Center)
(if equipped)
To scroll though the features that can be
customized using the Driver Information
Center:
1. Press the Personalization button
located on the steering wheel.
2. Press the Select button to
choose your desired setting. The first
setting is the default setting from the
factory.
3. Press the Personalization button to
move to the next feature.
Lock Doors
(Automatically locks the doors.)
• Lock Doors: In Gear
• Lock Doors: With Speed
Unlock Doors
(Automatically unlocks the doors.)
• Unlock Doors: In Park
• Unlock Driver: In Park
• Unlock Doors: Key Out
• Unlock Doors: Manually
Door Lock Delay
(Delays locking the doors and tailgate
until five seconds after the last door is
closed.)
• Door Lock Delay: Off
• Door Lock Delay: On
Lock Feedback
(The feedback received when locking
the vehicle with the Remote Keyless
Entry transmitter.)
• Lock Feedback: Both
• Lock Feedback: Lamps