Getting to Know Your H2
6
Automatic Climate Control
System
In addition to its automatic temperature
control feature, this climate control sys-
tem allows the driver and front passen-
ger to choose separate temperature
settings.
Adjust settings for automatic
operation
• Push the AUTO button (“A” above)
and adjust the temperature knob
(“B” above) to the desired tempera-
ture, to set automatic air delivery
mode, fan speed, A/C and recircula-
tion functions for the driver.
Set same temperature for driver and
front passenger
• Press and hold the AUTO button for
four seconds.
Select air distribution manually
• Press and release the Mode button
(“C” above) until the desired source
of air is indicated on the display.
Manually raise or lower fan speed
• Press the upper or lower portion of
the Fan control button (“D” above).
Additional Climate Control System
Functions
: Recirculates interior air while in
Vent, Bi-Level positions. To prevent win-
dow fogging, Recirculation will not oper-
ate in the Defog, Defrost or Floor mode.
: Clears windshield and front side
windows of fog/frost.
: Clears rear glass of fog/frost
and activates heated outside rearview
mirrors.
: Turns the air conditioning system
on and off. The snowflake symbol
appears on the display when the air
conditioning system is on.
See Section 3 of your Owner Manual.
Note: When the climate control system
is Off, outside air will continue to enter
the vehicle and will be directed accord-
ing to the mode position selected. This
is normal climate control operation.
Entertainment Systems —
Radio/CD
Your radio may have a button marked
“H” or “HR” to represent hours and an
“M” or “MIN” to represent minutes.
Set the time
• Press and hold the hour button
until the correct hour appears on the
display.
A
B
C
D
To Next Page
Loading...
Need help?
General
