Need help?Do you have a question about the Humminbird 587ci HD and is the answer not in the manual?
General| Display Size | 5 inches |
|---|---|
| Display Type | Color TFT |
| Sonar Type | DualBeam Plus |
| Sonar Frequency | 200/83 kHz |
| GPS | Yes |
| Chartplotting | Yes |
| Waterproof Rating | IPX7 |
| Target Separation | 2.5 inches |
| Power Output (RMS) | 500 watts |
| Power Output (Peak to Peak) | 4000 Watts |
| Temperature | Yes |
| Speed | Yes |
| Backlight | Yes |
| Mount | Gimbal Mount |
| Power Input | 10-20 VDC |
| GPS Trackplotting | Yes |
| Humminbird Mapping | Yes |
| Navionics | Compatible |
| Optional 360 Imaging | No |
| Humminbird PC | Yes |
| Upgradable Internal Software | Yes |
| Split Screen Zoom | Yes |
| Split Screen Bottom Lock | Yes |
| Large Digits View | Yes |
| Wide/Narrow Cone Split Screen | Yes |
| Custom View Selections | Yes |
| Custom Digital Readout Selection | Yes |
| Temperature Alarm | Yes |
| Operating Temperature | -15°C to 55°C |
| Sonar Coverage | 20°/60° |
| Max Depth | 1500 feet |
| GPS Receiver | Internal |
| Waypoints, Routes, Tracks/Points | 50 routes, 50 tracks |
Explains the 200/83 kHz DualBeam PLUS sonar system with wide coverage.
Details the Down Imaging transducer scanning with razor-thin, high-definition beams.
Describes the XD transducer for extreme depth coverage with DualBeam PLUS technology.
Powers unit on/off and adjusts display backlight and contrast.
Details the 4-WAY Cursor Control Key functions for menu selection, cursor movement, and view control.
Allows exporting all or selected navigation items to an installed SD card.
Instructions for updating control head software via an online account and SD card.
Details Sonar View, Sonar Zoom View, and Split Sonar View for analyzing sonar data.
Introduces marking waypoints, creating routes, and tracking paths for navigation.
Guides on saving current position or cursor position as a waypoint, and managing waypoints.
Instructions for navigating to the cursor position or a selected waypoint.
Accesses modes like Normal, Simulator, and System Status during power-on.
Provides shortcuts to frequently-used settings corresponding to the current view.
Standard menu settings organized into tabs for quick access to options.
Details Waypoints, Routes, Tracks, and Waypoint Settings for navigation data.
Addresses problems like fishfinder not powering up or defaulting to simulator mode.
To Next Page