Do you have a question about the Humminbird Piranha Max 10 and is the answer not in the manual?
Max Depth | 600 feet |
---|---|
Sonar Type | Dual Beam |
Target Separation | 2.5 inches |
Water Temperature Sensor | Yes |
GPS | No |
Water Resistance | IPX7 |
Display Type | Color LCD |
Sonar Frequency | 200 kHz |
Sonar Coverage | 20° |
Battery Life | Unknown |
Explains the 200 kHz single beam sonar system with a 20° coverage area.
Describes the 200/83 kHz dual beam sonar system with wide (60°) coverage.
Details how the PiranhaMax displays underwater information in an easy-to-understand format.
Instructions on how to turn the PiranhaMax unit on and off using the POWER-MENU key.
Explains the simple menu system for accessing and adjusting the PiranhaMax's settings.
Adjusts the display backlight for night fishing, with settings from 0 (Off) to 5.
Controls display detail by adjusting sensitivity from 0 to 10 for optimal sonar return visualization.
Sets the automatic or manual depth range for displaying the bottom and sonar returns.
Allows magnification of the bottom area to reveal fish and structure close to the seabed.
Sets chart speed from 1 (slowest) to 5 (fastest) to control sonar information display speed.
Configures audible alarms for detecting fish based on size classification (Off, Large, All).
Sets an audible alarm to sound when the water depth is equal to or less than a specified value.
Adjusts the sonar filter to limit display interference from sources like boat engine or turbulence.
Enables access to additional configuration choices like Contrast, Fish ID+, and Bottom View.
Adjusts the display contrast from 1 to 5 to improve visibility of sonar returns.
Uses signal processing to display fish symbols when specific requirements are met.
Selects display methods (Structure ID, Black) to represent the bottom and structure.
Sets an alarm for low battery voltage, ranging from Off to 13.5 Volts.
Selects the display language for menus, primarily for International Units.
Selects units for display (Feet/F, Meters/C, Fathoms/C).
Provides simple procedures for cleaning and caring for the unit and transducer.
Guides users through diagnosing and resolving common problems like no power or no transducer detected.
Addresses issues such as gaps in readings at high speeds, fading display, and display noise.
Provides contact information for customer resource center and direct shipping address.
Lists technical specifications for the PiranhaMax10 model.
Lists technical specifications for the PiranhaMax15 and PiranhaMax20 models.