Humphree Lightning - Page 30

30
7. SET UP THE LIGHTNING FUNCTIONS
2
3
ADJUST THE INTERCEPTOR BLADES while driving the boat at Hump Speed
and do the following:
HOME SCREEN > MANUAL CONTROLS
• Use dots on the screen to adjust the trim until visibility is unobstructed.
4
NOTE THE HUMP SPEED BLADE EXTENTION percentage number, to input
into the LCP later in Section 7.1.2 :
FIND OUT THE HUMP SPEED of the boat by driving it and accelerating slowly.
• Note down the speed at which visibility is most obstructed by the bow.