hune 6000RL-M - User Management and Access Control; Modify User Authority; Access Mode: Unlocked by Password

5. Modify user authority （0X32）
【#】+〖master code〗+〖master password〗+【#】+〖“32”〗+【#】+〖user
code be modified〗+【#】+〖user authority〗+【#】
6. Modify unlock times（0X33）
【#】+〖master code〗+〖master password〗+【#】+〖“33”〗+【#】+〖user
code be modified〗+【#】+〖unlock times〗+【#】
7. Modify valid time（0X35）
【#】+ 〖master code〗+〖master password〗+【#】+〖“35”〗+【#】+ 〖user
code〗+【#】+〖valid time〗+【#】
Tips:
a. Valid time: YY-MM-DD, must 6digital total.
b. Must block “untimed” first then can modify valid time.
Access mode
1. Unlocked by password
〖user code〗+〖user password（maximum 8 digital）〗+【#】
(Make sure the LED light stop, without any operation.)
2. Unlocked by scrambled password
〖user code 号〗+〖scrambled password1〗+〖user password〗+〖scrambled
password2〗+【#】
(The scramble password 1 + user password total maximum is 20digital.)
3. Always unlocked/open
Unlocked by password or scrambled password, when unlocked press【0】
last for 3seconds.
4. Release always unlocked
Unlock the lock by password / scrambled password successfully again, 5seconds later
will release automatically.
5. Lock constrainedly
【#】+【0】+【1】+【#】
(Lock the door without password. Can release always unlocked and lock
the door when first time install it.)
6. Deadbolt
Press the deadbolt button on back side panel, red light flash means the lock be
deadbolt.