6
IMPORTANT INFORMATION
The table below contains information that can help you quickly identify the product you are
installing. If you have any difficulties installing our product we recommend you to call our
technical advice line on 1300 360 280 for advice.
CODE SIZE FAN MODEL NAME COLOUR
A2300 132cm, (52”) Intercept
®
II without light White
A2301 132cm, (52”) Intercept
®
II without light Brushed Aluminium
A2302 132cm, (52”) Intercept
®
II without light Matt Black
A2306 132cm, (52”)
Intercept
®
II with light
(E27 Lamp Holders)*
White
A2307 132cm, (52”)
Intercept
®
II with light
(E27 Lamp Holders)*
Brushed Aluminium
A2303 132cm, (52”)
Intercept
®
II with light
(E27 Lamp Holders)*
Matt Black
A2342 132cm, (52”)
Intercept
®
II with light
(24W CCT LED dimmable)
White
A2343 132cm, (52”)
Intercept
®
II with light
(24W CCT LED dimmable)
Brushed Aluminium
A2344 132cm, (52”)
Intercept
®
II with light
(24W CCT LED dimmable)
Matt Black
Installation &
User Manual
1. Do not attempt to operate the fan (or optional light kit) with any wall control that is not approved by
HPI for use with its fans. DO NOT use solid state controllers. The use of unapproved controllers may
void your warranty.
2. Do not mix blade sets from one fan to another as this may upset the balance of the fan. If only one
blade is damaged you are still required to replace with a new set.
* Lamps for E27 Lamp Holders not supplied.
* Do not exceed maximum rated lamp capacities:
E27: 40W incandescent or 20W CFL/or LED (each lamp holder)
®
To Next Page
