Hunter Pacific Typhoon User Manual

Electrician
Installation Manual
Typhoon Ceiling Fan
CEILING FAN MUST BE INSTALLED
BY A LICENSED ELECTRICIAN
(NO OTHER PERSONS SHOULD ATTEMPT TO INSTALL THIS FAN)
*Electricians are recommended to tick off all items on the quick
checklist and fill out their details onto the back page of the Fan
Owner Warranty & Operations Manual after installation
National Warranty Line
1300 360 280
Monday to Friday from 9am to 5pm EST
Only available within Australia
Hunter Pacific International Pty Ltd, Building 8, 256 New Line Road, Dural NSW 2158 Australia
ABN :18 063 521 666
ELECTRICIANS - TO PROTECT YOUR CUSTOMER’S WARRANTY, PLEASE READ
PAGE 2 OF THIS BOOKLET PRIOR TO THE INSTALLATION OF THIS PRODUCT.

Hunter Pacific Typhoon Specifications

General

Fan Type	Ceiling Fan
Blade Size	52 inches
Motor Type	AC Motor
Control Type	Remote Control
Motor Speed	3 speeds
Material	Timber
Warranty	2 Year

Summary

IMPORTANT INFORMATION

Licensed Installation Requirement

Installation must be by appropriately licensed persons.

Warranty Exclusions

Excludes damage from incorrect installation, force-majeure, etc.

Safety and Warranty Considerations

Guidelines for safe installation and operation to protect warranty.

Assembling the Fan: Initial Steps

Step 1: Feeding Wires Through Down Rod

Procedure for feeding wires if not pre-fed through the down rod.

Step 2: Securing Hanger Bracket

Step 3: Tightening Grub Screw and Hanging Ball Joint

Wiring Instructions

Step 4: Connecting Fan and Ceiling Wires

Diagrams and steps for connecting fan wires to ceiling supply, with/without light.

Assembling the Fan: Final Steps

Step 5: Securing Canopy Cover

Step 6: Attaching Fan Blades (Metal)

Step 6: Attaching Fan Blades (Timber/Moulded)

Step 7: Setting Reverse Switch

Attaching 78mm Halogen Light Kit

Step 4: Installing Globe and Glass Cover

Attaching E27 Light Kit

Step 4: Installing Globes and Glass Cover

Attaching GX53M Fluorescent Light Kit

Step 1: Removing Base Plate

Step 2: Feeding Light Wires

Step 3: Connecting Wires and Securing Inner Housing

Step 4: Inserting Compact Fluorescent Light

Attaching an Extension Rod

Step 1: Removing Standard Down Rod

Step 2: Removing Ball Joint

Step 3: Installing Extension Rod

Installation Quick Checklist

Wall Controller Compatibility

Verify fan is not installed with incompatible solid-state wall controllers.

Earthing Requirements

Confirm fan, light kit, and bracket are properly earthed.

Final Circuit Connection

Ensure fan and light kit run from the same final circuit.

Mounting Bracket Security

Confirm bracket is firmly secured to a solid structure.

Blade Clearance