Hunter 21728 User Manual

Type 2 ModelsType 2 ModelsType 2 Models
Form# 42672-01
20110302
©2011 Hunter Fan Co.
For Your Records and
Warranty Assistance
For reference, also attach your receipt or a copy
of your receipt to the manual.
__________________________________________
Model Name
__________________________________________
Model No.
__________________________________________
Date Purchased
__________________________________________
Where Purchased
English Español
Owner’s Guide and Installation Manual

Hunter 21728 Specifications

General

Brand	Hunter
Model	21728
Category	Fan
Language	English

Summary

Cautions and Warnings

Preparing the Fan Site

Step 1 - Choose the Fan Site

Guidelines for selecting an optimal location for fan installation, considering clearance and obstruction.

Checklist for Existing Fan Site

A detailed checklist to verify the suitability and safety of an existing fan mounting location.

Preparing the Fan Site (continued)

Step 2 - Cut the Ceiling Hole

Procedure for cutting the correct size ceiling hole for mounting the fan's support structure.

Step 3 - Install a Support Brace, If Necessary

Instructions on installing a support brace between joists if the ceiling structure requires it.

Step 4 - Install the Outlet Box

Steps to securely attach the UL-approved outlet box to the ceiling joist or support brace.

Step 5 - Prepare the Wiring

Ensuring electrical power is off and preparing the supply line wiring for connection.

Installer's Choice and Optional Accessories

Understanding Mounting and Installer's Choice®

Overview of Hunter's mounting system offering flexibility: Low Profile, Standard, or Angled.

Considering Optional Accessories

Guidance on selecting and using optional accessories like speed controls for optimal fan performance.

1 • Getting Ready

Gathering the Tools

List of essential tools required for a successful ceiling fan installation.

Checking Your Fan Parts

Instructions on how to unpack and verify all fan components are present and undamaged.

2 • Installing the Ceiling Plate

3 • Assembling and Hanging the Fan

For Standard or Angled mounting

Assembly instructions for the downrod, canopy, and trim ring for standard or angled installations.

For Low Profile mounting

Assembly instructions using the low profile washer and screws for low ceiling installations.

Hanging the Fan

Procedure for safely lifting and attaching the fan assembly to the ceiling plate.

4 • Wiring the Fan

Dual Switch Wiring

Connecting the fan wiring for control by two separate switches.

Single Switch Wiring

Connecting the fan wiring for control by a single wall switch.

5 • Installing the Canopy and Canopy Trim Ring

6 • Assembling the Blades

7 • Completing Your Installation With a Multi-Staked Light Fixture

8 • Operating and Cleaning Your Ceiling Fan

To Change Airflow Direction

How to reverse the fan motor direction for summer or winter air circulation.

9 • Troubleshooting

Problem: Nothing happens; fan does not move

Diagnostic steps for a fan that fails to power on or operate.

Problem: Noisy operation

Troubleshooting common causes of noise during fan operation, such as loose screws.

Problem: Excessive wobbling

Steps to correct or balance the fan if it is wobbling excessively.

Problem: Lights shut off suddenly, but fan is still operating

Troubleshooting why the fan's light fixture might turn off while the fan continues to run.

Problem: CFL bulbs flicker when controlled by a dimming remote or wall control

Solutions for CFL bulb flickering when used with dimming controls.