Hunter 23803 User Manual

Blade Set
Blade Iron Set
Wood Screw
Wood Screw
Isolator
Fan Parts
(Not Drawn to Scale)
Hardware
(Drawn to Scale)
Wire Nut
Flat Washer
Low Profile Washer
46
150
148
Canopy
3
Canopy
Trim Ring
4
2
Ceiling Plate
7
Hanger Ball /
Downrod
Assembly
Locking Screw
Screw, Machine, 6-32
Motor Housing Assembly
Globe / Shade
Finial
Bottom Cap
Switch
Housing
Assembly
Canopy Screw
Blade Assembly Screw
Screw, Blade Iron Armature
Blade Grommet66
Before installing your fan, record the following information for your records and warranty assistance.
Missing / Broken Parts:
Call 1-888-830-1326
Fan does not work:
1. Reference the Trouble Shooting guide in
your Instruction Manual.
2. Call your Local Service Center.
3. Call Technical Support at 901-248-2222.
For additional information on:
Hunter Products Trouble Shooting
Dealer Location Service Center Locator
Call 1-800-448-6837
www.hunterfan.com
R
If parts are missing or damaged call 1-888-830-1326.
PLEASE DO NOT RETURN THIS PRODUCT TO THE STORE.
Model Name
Catalog No.
Serial No.
Date Purchased
Where Purchased
PARTS GUIDE
PARTS GUIDE
PARTS GUIDE
PARTS GUIDE
Using the Parts Guide below, check to make sure all parts are included in the box.
Switch
Housing Cover
Switch Housing
Plug Button
Dummy
Terminal, Male
Dummy
Terminal, Female
28
65
64
100
62
71
68
27
70
44
149
69
67
47
29
41
205
206
Screw, Switch Housing
Assembly
131
Balancing Kit
75
Wire Nut
70a
GUÍA DE PIEZAS
Remote Control
Transmitter
87
Remote Control
Receiver
86
Remote
Control Cradle
88

Hunter 23803 Specifications

General

Model	23803
Type	Ceiling Fan
Blade Span	52 inches
Number of Blades	5
Motor Type	WhisperWind
Control Type	Pull Chain
Light Kit	No
Finish	New Bronze
Reversible	Yes
Warranty	Lifetime

Summary

Fan Parts Identification

Ceiling Plate and Canopy Components

Components for mounting the fan to the ceiling, including the ceiling plate and canopy.

Motor Housing and Downrod Assembly

The main motor housing and the assembly connecting it to the hanger ball or downrod.

Light Fixture Components

Parts related to the light fixture, such as the globe, shade, and bottom cap.

Blade and Balancing Components

Includes blade sets, blade iron sets, and the balancing kit for fan operation.

Fan Hardware Components

Screws and Fasteners

Various screws like wood screws, locking screws, and machine screws for assembly.

Washers and Grommets

Essential hardware like flat washers, low profile washers, and blade grommets.

Wire Management Components

Includes wire nuts for electrical connections and insulators.

Electrical and Control System Parts

Switch Housing and Controls

Components for the fan's electrical switch housing and plug buttons.

Remote Control System

Parts for the remote control, including the receiver, transmitter, and cradle.

Important Information and Support

Installation and Safety Warnings

Critical instructions regarding installation, product return policy, and safety precautions.

Troubleshooting and Technical Support

Guidance for when the fan does not work and contact information for support.