Hunter 23714 User Manual

Blade Set
Blade Iron Set
Wood Screw
Fan Parts
(Not Drawn to Scale)
Hardware
(Drawn to Scale)
Canopy
46
44
7
3
Canopy Trim Ring
4
2
Wood Screw
65
67
64
Wire Nut70
Washer, Flat68
66 Blade Grommet
Screw, Blade Assembly
Ceiling Plate
61
Washer
Installer Choice
Motor Housing Assembly
Hanger Ball /
Downrod Assembly
259
Screw, Canopy
Trim Ring
62
Canopy Screw
Balancing Kit
Switch /
Housing
Assembly
28
63 Screw, Low Profile Washer
150
Globe / Shade
Silencer Band
155
Before installing your fan, record the following information for your records and warranty assistance.
Missing / Broken Parts:
Call 1-888-830-1326
Fan does not work:
1. Reference the Trouble Shooting guide in
your Instruction Manual.
2. Call your Local Service Center.
3. Call Technical Support at 901-248-2222.
For additional information on:
Hunter Products Trouble Shooting
Dealer Location Service Center Locator
Call 1-800-448-6837
www.hunterfan.com
If parts are missing or damaged call 1-888-830-1326.
PLEASE DO NOT RETURN THIS PRODUCT TO THE STORE.
Model Name
Catalog No.
Serial No.
Date Purchased
Where Purchased
PARTS GUIDE
PARTS GUIDE
PARTS GUIDE
PARTS GUIDE
Using the Parts Guide below, check to make sure all parts are included in the box.
75
47
Screw, Blade Iron
Armature
71
Mounting Isolator

Hunter 23714 Specifications

General

Type	Ceiling Fan
Blade Span	52 inches
Number of Blades	5
Number of Speeds	3
Reversible Motor	Yes
Warranty	Lifetime Motor Warranty

Summary

Fan Parts

Ceiling Plate

Component for mounting the fan to the ceiling.

Canopy

Covers the ceiling plate and wiring.

Canopy Trim Ring

Decorative trim for the canopy.

Hanger Ball / Downrod Assembly

Connects the fan motor to the ceiling mount.

Switch / Housing Assembly

Contains fan speed and light controls.

Blade Set

Set of fan blades for air movement.

Blade Iron Set

Metal brackets for attaching blades to the motor.

Motor Housing Assembly

Enclosure for the fan motor.

Globe / Shade

Component for housing the light bulb.

Silencer Band

Reduces operational noise.

Hardware

Wood Screw

General purpose screws for wood installation.

Blade Grommet

Bushings for fan blade mounting screws.

Screw, Blade Assembly

Fastener for attaching blades to brackets.

Flat Washer

Used with screws to distribute load.

Wire Nut

Connects electrical wires.

Mounting Isolator

Dampens vibration during operation.

Screw, Canopy Trim Ring

Fastener for securing the canopy trim ring.

Balancing Kit

Kit to balance fan blades for smoother operation.