To Next PageTo Next Page
Need help?Do you have a question about the Hunter 23902 and is the answer not in the manual?
General| Type | Ceiling Fan |
|---|---|
| Blade Span | 52 inches |
| Number of Blades | 5 |
| Motor Speeds | 3 |
| Motor Type | AC |
| Control Type | Pull Chain |
| Finish | Brushed Nickel |
| Reversible Motor | Yes |
| Model | 23902 |
| Warranty | Lifetime |
Covers essential safety guidelines for installation and operation, including electrical safety, part usage, and warnings against modifications.
Explains Hunter's 2-position mounting system for standard and angled ceilings, offering installation flexibility.
Discusses optional accessories like wall/remote controls and the importance of using Hunter-specific speed controls.
Lists necessary tools for fan installation and instructs on checking parts for damage or missing items before proceeding.
Emphasizes the importance of proper ceiling fan location and secure attachment to the building structure for safety and efficiency.
Details the process of drilling pilot holes, positioning isolators, feeding wires, and securing the ceiling plate using screws.
Provides specific guidance on orienting the ceiling plate for vaulted or angled ceilings, aligning arrows with the ceiling peak.
Guides through attaching the downrod, canopy, and trim ring, and hanging the fan securely onto the ceiling plate's hook.
Provides instructions for using an optional 6-inch downrod, including transferring components and reassembling the ball assembly.
Details electrical wiring procedures, safety precautions, and adherence to national/local electrical codes for safe fan connection.
Explains the specific wire connections required for both dual-switch and single-switch fan operation.
Covers raising the fan, aligning canopy slots with ceiling plate tabs, and securing the canopy with screws.
Provides step-by-step instructions on how to detach the canopy trim ring by locating and pressing tabs.
Details attaching blades to blade irons using assembly screws and securing blade irons to the motor armature.
Explains how to activate the Perfect Balance system by removing retaining screws for downrods 6 inches or shorter.
Covers securing the upper switch housing to the mounting plate, feeding connectors, and tightening housing assembly screws.
Details connecting the lower switch housing to the upper housing and securing it with assembly screws.
Guides through installing light bulbs, pull chains, the glass bowl, cover plate, and finial.
Provides steps to safely disconnect and remove the light fixture, install dummy terminals, and cap the housing.
Covers first-time fan operation for balancing, pull chain settings (High, Med, Low, Off), and breakaway connector function.
Explains fan use for warm/cold weather airflow and provides instructions for cleaning fan finishes and blades.
Addresses issues like fan not moving, noisy operation, and excessive wobbling with specific troubleshooting steps.
Provides contact details for parts or service assistance, including phone numbers and website.
