Hunter 23902 - Assembling the Blades; Blade and Blade Iron Assembly

10
42776-01•04/29/08•HunterFanCompany
BladeAssembly
Screw
Step 6-1
Grommet
6-1. Your fan may include blade grommets. If your fan has grommets,
insert them by hand into the holes on the blades.
6-2. Attacheachbladetoabladeironusingthreebladeassembly
screws. If you used grommets, the blades may appear slightly
loose after screws are tightened. is is normal.
6-3. Loosen the blade iron armature screws that are holding the
shipping bumpers in place. Push the shipping bumpers in, then
lift them off.
6-4. Slide the blade irons onto the blade iron armature screws and
tighten the screws securely.
Step 6-3
Blade Iron
ArmatureScrew
Shipping
Bumper
Steps 6-1 – 6-2
BladeAssembly
Screw
Grommet
Blade
Blade
Iron
Blade Iron
ArmatureScrew
6 • Assembling the Blades