Hunter 23902 - Completing Installation: Light Fixture Options; Attaching the Upper Switch Housing

12
42776-01•04/29/08•HunterFanCompany
YourHunterfancomeswithanintegratedlightxtureassemblyand
an optional switch housing cap and plug button. is feature gives
youtheoptionofinstallingthefanwithORwithouttheincludedlight
fixture. e steps below direct you whether or not you are installing a
light fixture.
Note:isfanistobeinstalledONLYwiththeenclosedlightkit.Useof
another light kit will result in improper performance of the fan and will void
the warranty.
WARNING:Useonlythelightxturesuppliedwiththisfanmodel.
8-1. Toattachtheupperswitchhousing,partiallyinstalltwohousing
assembly screws into the switch housing mounting plate.
8-2. Feedtheupperplugconnectorthroughthecenteropeningofthe
housing.
8-3. Alignthekeyholeslotsinthehousingwiththehousingassembly
screws.
8-4. Turnthehousingcounterclockwiseuntilthehousingassembly
screws are firmly situated in the narrow end of the keyhole slots.
Install the remaining screw into the housing. Tighten all three
screws firmly.
CAUTION: Make sure the upper switch housing is securely
attached to the switch housing mounting plate. Failure to properly
attach and tighten all three assembly screws could result in the
switch housing and light fixture falling.
8-5. If you want to install the light fixture,proceedwithStep8-6
now.
If you do not want to install the light fixture, you need to
uninstallitnow.See“UninstallingtheLightFixture”onStep8-17.
Onceyouhaveuninstalledthelightxture,continuewithStep
8-6.
Steps 8-1 – 8-3
Housing
Assembly
Screw
Upper
Switch
Housing
8 • Completing Your Installation With or Without a Bowl Light Fixture