Hunter 30408 - Air Sanitizer Assistance; Troubleshooting and Support

7
©2012 Hunter Fan Company
Air Sanitizer Assistance
Troubleshooting and Support
1. Unit does not operate.
2. Conrm that the unit is plugged in.
3. Check the installation of the lter.
4. Unusual noise; popping, sizzling, etc.
5. Reset the air sanitizer. Unplug the unit for 1 minute, then
plug it back in.
6. Check the installation of the lter.
7. Check to see if the lter needs to be replaced.
8. Unit has reduced air ow or increased noise.
9. The lter may be excessively dirty. Replace the lter if needed.
If you need any assistance with setup, operation, or parts
for your new Hunter air sanitizer, please call us, our
technical support staff is ready to help!
USA: 1-888-830-1326
Canada: 1-866-268-1936
Hours of operation are from 7:00 am to 7:00 pm
Monday - Friday and 8:00 am to 5:00 pm on Saturday,
Central Time. You may also contact us over the Internet
at www.HunterFan.com or register your product
at www.HunterFan.com/register and select your
product under product registration.
Technical Support
IV