EasyManua.ls Logo

Hunter 30943 - Air Purifier Maintenance; Cleaning Your Air Purifier; Cleaning Pre-Filters and Changing Carbon Filter

Hunter 30943
16 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
42937-01 10
Cleaning Your Air Purier
Proper maintenance of your Hunter Air Purier will help ensure years of trouble free
service.
Follow these steps to properly maintain your Air Purier:
1. Approximately every 90 days, the outside of the unit should be cleaned with a
soft, damp cloth.
2. If needed, the Front Grill can be removed from the unit and cleaned with soapy
water. NOTE: Remove the Carbon Odor Filter before exposing the Front Grill to
water.
3. Follow the instructions in Cleaning the Pre-Filters and Changing the Carbon Odor
Filter (pg. 10) and Changing the QuietFlo
®
Main Filter (pg. 11) to determine when
and how to replace the lters.
NOTES:
The Air Purier must be unplugged during the cleaning process.
Be sure the unit is completely dry before plugging in and using.
Never immerse unit in water.
Cleaning the Pre-Filters and Changing the Carbon Odor Filter
When the Pre-Filter exceeds 2000 hours (refer to Filter Life Counters for additional
information, pg. 9), the Pre-Filter indicator will turn on as a reminder that you should
clean the Pre-Filter and change the Carbon Odor Filter. To maintain proper odor-
removing capability and overall ltration performance, the Pre-lters should be cleaned
and the Carbon Odor lters replaced every 2000 hours (approximately 3 months of
use). If necessary, clean the pre-lter and change the odor lter more often. Proper
maintenance of the pre-lter will help extend the life of the QuietFlo
®
lter. Refer to
Obtaining Replacement Filters (pg. 13) if you need help nding replacement lters.
To clean the Pre-Filters, Change the Carbon Odor Filter, and reset the Pre-Filters &
Carbon Odor Filter Life Counter:
1. First, turn off and unplug the Air Purier.
2. Next, remove the front grill. Refer to Figs. 4 and 5 (pg. 6).
3. Remove the Pre-Filters. Refer to Fig.2, pg. 4. Use a vacuum cleaner to
remove dust from them. Then, reinsert the Pre-Filters into the Air Puri-
er.
4. The Carbon Odor Filter is held to the back of the Front Grill with four
hook-and-pile fasteners. Peel off the old Carbon Odor Filter.
5. If needed, use a soft damp cloth to wipe off the Front Grill. Gently press
a new lter into place.

Related product manuals