Hunter 30943 - Obtaining Replacement Filters

42937-01 12
RIDGE
Fig. 11
5. Place the bottom of the lter rim behind the ridges on each side of the
bottom of the unit. Refer to Fig. 11.
6. Lift the Filter Tab and press the top of the lter into the Air Purier. To
avoid damaging the lter, you should press only on the lter’s frame.
When the new lter is in place, release the Filter Tab.
7. Place the front grill back onto the unit. Refer to Figs. 7, pg. 7. NOTE:
This unit will not operate unless the grill is in the correct position.
8. Plug the unit in and continue operating it normally.
9. To reset the QuietFlo
®
Main Filter Life Counter to zero, press and hold
the QuietFlo
®
Main Filter Life Counter Reset Key for three seconds.
When the display shows 100%, release the Key. The Counter is now
reset.
Obtaining Replacement Filters
To obtain replacement lters for your Air Purier, rst determine your model number
by looking at the information label on the bottom of the Air Purier. The model num-
ber will be listed on the label. Then, call 1-800-4HUNTER for your nearest retailer
or Hunter Customer Service at 1-800-313-3326 (CAN 1-888-855-8300) to order
directly. To order online, visit our Website at www.hunterfan.com. To ensure that
you obtain the correct lters, please nd your model number below that species
the correct replacement lters.
Hunter Air Purier Model No.: 37785
Carbon Odor Filter Replacement Model No.: 30901
HEPAtech
®
Filter Replacement Model No.: 30943