7 42937-01
Operation
4. If the lter is secure, place the front grill back onto the unit. Place the grill
over the front of the Air Purier and lower it into position. Refer to Fig. 7.
NOTE: This unit will not operate unless the grill is in the correct position.
If the lter is not secure, refer to the section Changing the QuietFlo
®
Main Filter (pg. 14).
Fig. 7
5. Plug the unit into a 120V electrical outlet and press the ON/OFF Key.
The fan will begin to blow air from the front of the unit.
6. Use the FAN SPEED CONTROL Key to set the fan speed. Refer to
Fig. 8.
SLEEP (SLOW) ACTIVE (MEDIUM) TURBO CLEAN
(FAST)
Fig. 8
To Next Page
Loading...
