Hunter 35617 - Controls and Indicators

6
44054-01 • 06/08/2010
Using Your Humidifier
Controls
2
Speed Setting:
Off Turns the unit off.
Low: Extends the time between rells by running the fan on low.
Lowest noise setting recommended for nighttime use.
Medium: Average rell rate and optimal for day use. Minimal noise
level.
High: Use for quick humidication to a room during the day. Average
noise level and quick rell rate.
Humidity Control:
The humidity control allows you to set the amount of humidity you want
the unit to output. The humidty knob is a percentage, ranging from 30%
at it’s lowest to 80% at the highest. Turn the knob clockwise to increase
humidity output. When the humidier has reached the set humidity
level, it will shut off until the humidity level drops agian.
Indicators:
Power Indicator: Indicates the unit is turned on. If the humidier is not running,
check that the humidity control has not turned the unit off by increasing the
humidity. For additional help check “Troubleshooting” on page 10.
UVC Indicator: Indicates the UVC is running. This light should always be on if the
unit is running.
Speed
Control
Humidity
Control
UVC
Indicator
Power
Indicator
Figure 4.
Power
UVC