EasyManua.ls Logo

Hunter 44132 - Accessing and Using Menu Options

Hunter 44132
37 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
44067-01 • 10/13/2010
28
6
Features
Menu Options
Under your Menu options you have the ability to reset your lter counter,
change your day/time settings, and change rst and second stage spans.
To change each setting, you will need to hit the
Next
button to move through
each feature.
To access these options:
1. Press the
Menu
button.
2. If you need to reset your lter indicator on the screen use the
or
buttons to select “Y”. If you need to make no other changes press
Done/
Home
to return to the home screen, otherwise press
Next
. The
Next
button will
advance you through this option if you do not need to reset the lter
counter. If you select “N” then the lter counter will not be reset and may
continue to ash “Filter” on the screen if it was active before entering this
menu.
3. Next you are given the option of changing your day/time. You will use the
same instructions as on 10 to change these settings. The
and buttons
change the day of week, am/pm, hour, and minutes. The
Next
or
Back
buttons browse through each option. Press
Next
to advance to your next
feature from the minutes adjustment.
Note: If you do not need to change your time/day, just use the
Next
button
until the screen shows updated and advances you to the next option.

Other manuals for Hunter 44132

Related product manuals