Hunter 44150 - Thermostat Operations and Troubleshooting; Filter Monitor and Other Features

Operations
72
.
7I
.
70
.
Filter Monitor
To Reset the Filter Counter to Zero
■ Filter indicator disappears.
M T W TH F SA SU
SET TEMP HOLD TEMP
86
:
30 68
c
AM
PM
HEAT COOL
1234
FILTER
LO BAT
M T W TH F SA SU
SET TEMP HOLD TEMP
86
:
30 68
c
AM
PM
HEAT COOL
1234
FILTER
LO BAT
FILTER
RESET
28-29
The Hunter Digital Thermostat measures and stores the amount of time the heating or air
conditioning system operated.
After 500 hours of usage, the word “FILTER” will appear and flash on the display, reminding
you to check or replace your system filter.
NOTE: “FILTER RESET” button works only when “FILTER” is displayed on the display.
If “RESET” button is pressed when “FILTER” is not displayed, the internal counter will
not reset.
Press