Hunter 52486 User Manual

7
8
1886
1886
Ceiling Bracket Downrod Hanging Fan Wiring Canopy Blades Light Glass/Bulbs
Installing the Blades
Put the blade washers, found in the hardware bag, onto the
blade screws, found in the hardware bag. Then install the
blade screws to secure each blade to a blade iron.
Repeat x5
x15
x15
bag
bag
Blade Screw
Washer
Fan style may vary.
Note:
Lightly attach the blade arms to the motor with screws
found in the
hardware bag, then securely tighten
after both screws are attached.
Repeat x5
x10
bag
Blade Arm Screw
IMPORTANT
NOTE: The blade arms should be mounted with
the ridge facing downward. Installing it incorrectly
could result in your fan not functioning.
Ridge
Fan style may vary.
Note:
Installing the Canopy
x2
Lift the canopy into place so that
the screw holes are aligned.
Insert the two canopy screws
found in the
hardware bag.
F
i
t
t
h
e
c
a
n
o
p
y
i
n
p
l
a
c
e
a
s
s
h
o
w
n
.
bag
Canopy Screw

Hunter 52486 Specifications

General

Brand	Hunter
Model	52486
Category	Fan
Language	English