Need help?Do you have a question about the Hunter Anorak and is the answer not in the manual?
Required hand tools for basic fan assembly, including ladder, screwdriver, pliers, and wire strippers.
Optional power tools like a drill and drill bit for specific mounting scenarios or support structures.
Hardware components for attaching the hanger bracket and connecting the fan's wiring.
Specific screws and washers for attaching fan blades and installing the fan canopy.
Fasteners required for assembling the fan's light kit.
Includes wall control, remote receiver, and any extra fasteners provided.
Guidelines for choosing a suitable location, checking room dimensions and outlet box compatibility.
Steps to prepare the ceiling bracket, including removing isolators and aligning mounting holes.
Details on two installation methods: using machine screws or wood screws for securing the bracket.
Step-by-step guide for assembling and securely attaching the downrod to the fan motor.
Instructions on how to safely lift and hang the fan assembly onto the ceiling bracket.
Detailed instructions and diagrams for correctly connecting the fan's electrical wires to power and the receiver.
Steps to properly fit and secure the fan canopy to the ceiling bracket.
Instructions for attaching the fan blades to the motor housing using the correct hardware.
Process for assembling the upper and lower switch housings for the light kit.
Guide for installing light bulbs and securely attaching the glass globe to the fixture.
Steps for wiring and installing the wall control unit and its battery.
Explanation of key presses and their corresponding functions for the remote control.
Instructions on how to change the fan's airflow direction using the reverse switch.
Solutions for common problems like fan not working, wobbling, or noisy operation.
Details on warranty coverage, exclusions, and how to obtain service.
Step-by-step instructions for removing and reassembling the downrod for different lengths.
To Next Page
General
