Need help?Do you have a question about the Hunter Aerodyne and is the answer not in the manual?
Important safety precautions for installation and use, including electrical hazards.
Guidance on electrical code compliance and using manufacturer-approved parts.
Details passing wires and hand-tightening the downrod assembly.
Emphasizes using pliers to tighten the setscrew to prevent fan fall.
Explains how to place the downrod ball into the ceiling bracket slot.
Details the connection steps for fans controlled by a single wall switch.
Explains the wiring procedure for fans with separate controls for fan and light.
Stresses the critical need for proper grounding of the fan for safety.
Alerts about ensuring all screws are tight to prevent fan detachment.
Warns about ensuring the glass is properly secured to prevent falling.
Emphasizes verifying the downrod assembly is secure by pulling on it.
Stresses the importance of reinserting the pin to secure the downrod assembly.
Solutions for when the fan does not power on, including checking connections.
To Next Page
General
