Need help?Do you have a question about the Hunter Amaryllis and is the answer not in the manual?
Covers critical safety warnings including electrical shock, chemical hazards, and proper battery handling.
Details compliance with FCC rules for digital devices and conformity to UL Standard 507.
Lists essential tools like ladder, screwdriver, pliers, and wire strippers for fan installation.
Identifies optional tools like a drill and bit for mounting to support structures.
Details all fan components and hardware provided, using symbols for identification.
Specifies minimum clearance requirements for blades and fan height from the floor.
Explains requirements for standard vs. angled/vaulted ceilings and the need for mounting kits.
Describes two methods for securing the ceiling bracket using machine or wood screws.
Guides on connecting the downrod to the fan motor, including wire management and setscrew tightening.
Critical safety warning about properly tightening the setscrew to prevent fan detachment.
Instructions on sliding the canopy over the downrod and wires, and seating the downrod ball.
Important notice on how to properly lift the fan housing or downrod to prevent damage.
Step-by-step instructions for connecting fan wires to the receiver and ceiling supply, with warnings.
Tips on tucking excess wiring safely into the outlet box and hanger bracket.
Details on fitting the canopy and using canopy screws, with a tip for using a magnetic screwdriver.
Instructions for attaching blades to blade arms using washers and screws, noting ridge orientation.
Steps for feeding the plug connector and securing the light kit assembly with screws.
Instructions for installing the switch housing components and plate using short light kit screws.
Critical safety warning to ensure all screws are tight for the light fixture.
Instructions for attaching the globe assembly using thumbscrews and turning the power on.
Critical safety warning to ensure glass is properly secured to prevent injury or death.
Details on battery installation for the remote control and a remote function guide.
Provides two options for mounting the remote cradle: using an adhesive strip or screws.
Explains how to change the fan's rotation direction using the reverse switch inside the light fixture.
Troubleshooting tips for fan not working, excessive wobbling, and noisy operation.
Provides a pro tip on cleaning the fan using soft materials to avoid scratching.
Outlines the limited lifetime warranty for the motor and one-year warranty for other parts, including light kits.
Step-by-step instructions for removing the standard downrod and reassembling with a new downrod.
Critical safety warning for downrod assembly, emphasizing secure pin insertion and pulling the hanger ball.
To Next Page
General
