Need help?Do you have a question about the Hunter Abernathy and is the answer not in the manual?
Critical safety instructions regarding electrical shock, fire risk, chemical hazards, and proper handling.
Important cautions on wiring, parts, and device compliance with FCC and UL standards.
Crucial step to turn off power before installation to prevent electrical shock.
Securing the bracket to an existing fan-rated outlet box using machine screws.
Step-by-step instructions for connecting wires in a single-switch setup.
Step-by-step instructions for connecting wires in a dual-switch setup.
Installing grommets onto blade screws before attaching blades to the fan motor.
Steps to diagnose and resolve issues when the fan does not operate.
Resolving erratic remote function, pairing issues, and multiple remote interference.
Step-by-step guide for safely removing the standard downrod pipe from the fan.
Steps for correctly reassembling the fan with a different length downrod.
Critical safety check to verify correct downrod assembly by pulling on the hanger ball.
To Next Page
General
