Hunter Abernathy User Manual

7
8
1886
1886
Installing the Blades
Repeat x5
x15
bag
Blade Screw
x15
bag
Grommet
Note: The screw was installed for shipping purposes only.
Preparing the Light Fixture
Remove the pre-installed xture screws and red
ag from the light kit assembly. Save the screw.
It will be needed for light kit installation.
Follow these steps to prepare the light xture for installation.
Red Flag
KEEP
x2
Fixture Screw
Carefully remove the light xture from
the light xture hood
Put the grommets found in the hardware bag
onto the blade screws found in the hardware
bag. Then install the blade screws to secure each
blade to the fan.
Ceiling Bracket Downrod Hanging Fan Wiring Canopy Blades Light Glass Remote CradleRemote
Installing the Canopy
x2
Lift the canopy into place so that
the screw holes are aligned.
Insert the two canopy screws
found in the hardware bag.
F
i
t
t
h
e
c
a
n
o
p
y
i
n
p
l
a
c
e
a
s
s
h
o
w
n
.
bag
Canopy Screw

Hunter Abernathy Specifications

General

Brand	Hunter
Model	Abernathy
Category	Fan
Language	English