Need help?Do you have a question about the Hunter Aker and is the answer not in the manual?
Lists essential tools like ladder, screwdriver, pliers, wire strippers for installation.
Lists optional tools like drill and drill bit needed for specific mounting situations.
Identifies and illustrates fan components and hardware bags for easy recognition during assembly.
Explains the importance of hardware bags and symbols for correct part identification.
Notes the potential inclusion of extra fasteners for convenience.
Covers dimension, outlet box, and ceiling angle checks for installation.
Explains bracket mounting with machine/wood screws and tips for angled ceilings.
Details preparing the downrod, wire management, and tightening the setscrew.
Highlights critical safety warnings regarding setscrew tightening to prevent injury.
Describes sliding the canopy over the downrod and wires before hanging.
Details how to lift and place the downrod ball into the ceiling bracket slot securely.
Warns to lift the fan by housing or downrod to prevent damage.
Covers wire nuts, grounding, wiring management, and crucial safety warnings.
Details connecting fan wires to ceiling wires for a single-switch setup.
Details connecting fan wires to ceiling wires for a dual-switch setup.
Details how to align and attach the canopy using canopy screws.
Explains attaching blades using washers and screws, repeating for each blade.
Guides on connecting wires, mounting the kit, and installing the switch housing.
Instructs on installing bulbs and securing the glass globe, with safety warnings.
Details feeding pull chains through housing and attaching pendants for fan/light control.
Explains accessing and operating the switch to change airflow direction and its effects.
Addresses common problems like non-operation, wobbling, noise, and cleaning tips.
Covers service, coverage, exclusions, and state-specific warranty rights.
Details steps for removing standard downrod and reassembling with a new one.
Emphasizes fan fall hazard related to downrod assembly and hanger ball verification.
To Next Page
General
