Hunter Argenus 30987 - Page 8

Air Sterilizer Maintenance
Fan Speed Control Dial
(Top Cover Removed)
Pre-Filter
Reset Button
43006-01 8
NOTES:
• TheAirSterilizermustbeunpluggedduringthecleaningprocess.
• ThePre-FilterwilltintotheunitONLYwhenorientedcorrectly.IfthePre-Filter
does not slide easily into the unit, do not force it. Simply turn the Pre-Filter
around, and reinsert it into the unit.
• TheAirSterilizerwillnotoperateifthePre-Filteriseitheroutoftheunit,oris
not seated correctly in the unit.
To clean the Pre-Filter and reset the Pre-Filter Life Counter:
1. Remove the Pre-Filter. See Figure 5. Note the Pre-Filter’s orientation, as it must
be reinstalled in the same orientation. Use a vacuum cleaner with upholstery
attachment to clean the Pre-Filter. Vacuum gently until all dust and debris is
removed. Return the Pre-Filter to the unit.
Fig.5-RemovingthePre-Filter
2. Reset the Pre-Filter Life Counter by pressing the Pre-Filter Reset Button. for
5 seconds. See Figure 6.
Fig. 6 - Resetting the Pre-Filter Counter
Cleaning the Pre-Filter and Changing the Main Filter (cont.)