Hunter B - 6. Assembling the Blades; Blade Removal; Note: The blades on this fan have been treated...

12
45070-01 • 01/26/12 • Hunter Fan Company
Our blade assembly enables you to lock the blades in place without tools and
to remove the blades easily for cleaning.
6-1. Align the three holes in the blade with the three blade iron posts.
6-2. Using two hands, squeeze the blade and blade iron together with your
thumbs under the blade iron and your ngers on top of the blade. You
will feel the blade lock into place.
6-3. Make sure the blade is securely attached to the blade iron and the ared
tops of the blade iron posts are fully visible above the blade.
6-4. Repeat steps 6-1 through 6-3 until all the blades are installed.
Blade Removal:
1. Cover the blade iron posts with a protective cloth to prevent scratching
the blades.
2. Using pliers, loosen the blade iron posts by turning them
counterclockwise. Once they are loosened, nish unscrewing them by
hand until they are completely separated from the blade iron.
3. Carefully remove the blade.
Step 6-2
Step 6-1
Blade
Blade Iron
Blade Iron
Post
CAUTION: Be sure
blade is locked into place
and that the head of
each blade iron post is
completely visible.
WRONG
WRONG
RIGHT
Flared Top
Note: e blades on this
fan have been treated
with Hunter’s Dust Armor
protection, making the blades
less likely to attract dust and
dirt. Use a dry or slightly damp
lint free cloth to clean the
blades. Do not use a furniture
polish or any other cleaners
that leave any residue, as they
will damage the protective
Dust Armor on the blades.
6 • Assembling the Blades
Step 6-3c
Step 6-3b
Step 6-3a
6 • Assembling the Blades