Need help?Do you have a question about the Hunter Coral Bay and is the answer not in the manual?
Essential safety directives for installation and operation, including electrical shock and injury prevention.
Tools required for standard ceiling fan installation.
Tools needed for mounting to specific support structures.
Details the various screws, washers, and nuts included for assembly.
Lists the main parts of the ceiling fan and its accessories.
Ensures adequate clearance for safe fan operation and movement.
Specifies the necessary support for the fan's outlet box.
Guides selection of mounting method and accessories based on ceiling pitch.
Provides a method to check if an angled mounting kit is required for ceilings over 34 degrees.
Two methods for securely attaching the ceiling bracket to the support structure.
Specific alignment for the bracket on angled ceilings for proper fit.
Step-by-step guide for attaching the downrod to the motor assembly.
Critical safety instruction to prevent fan detachment from the downrod.
Instructions for safely lowering the fan onto the installed ceiling bracket.
Guides the positioning of the canopy before final attachment.
Details how to connect power, ground, and control wires using wire nuts.
Emphasizes the critical safety step of connecting all grounding wires.
Instructions for placing the remote receiver within the ceiling bracket.
How to attach the canopy to the ceiling bracket using provided screws.
Instructions for attaching blades to the blade arms with washers and screws.
Steps for attaching the blade arms to the fan motor housing.
Critical instruction for correct blade arm mounting to ensure fan functionality.
Steps for partially installing screws and feeding wires for the light fixture.
How to connect the wire plugs from the upper and lower housings.
Final steps to attach and secure the light kit housing to the motor.
Instructions for inserting the included LED bulbs into the light fixture sockets.
Steps for carefully installing the glass and securing the light fixture cage.
Guide to accessing the remote's battery compartment and installing the battery.
Explains the buttons and their corresponding fan operations.
Method for installing the cradle using a strong adhesive strip.
Method for installing the cradle using screws, including drywall anchor usage.
Instructions on how to switch between downdraft and updraft modes.
Steps to diagnose and resolve issues when the fan does not power on or operate.
Solutions for excessive wobbling or noisy fan operation, including balancing.
Guidance for troubleshooting remote control malfunctions and pairing.
Procedure for requesting warranty service and required documentation.
Outlines what parts and durations are covered under the warranty.
Lists conditions and damages not covered by the warranty.
Guide for disassembling the existing downrod assembly.
Instructions for assembling and attaching a different length downrod.
To Next Page
General