Need help?Do you have a question about the Hunter Crestfield and is the answer not in the manual?
Important safety precautions to reduce risk of fire, electrical shock, or personal injury during installation and use.
Adherence to electrical codes and use of specified parts for safe installation and operation.
Information regarding FCC rules, device compliance, and potential radio frequency interference.
Tools required for mounting the fan to a standard electrical box.
Tools required for mounting the fan directly to building structure.
List of all fan components included in the box for assembly.
List of all screws, washers, and other hardware provided for installation.
Essential safety step: Turn off power at the breaker and wall switch before installation.
Information for installing the fan on flat ceilings using the pre-installed downrod.
Guidance on using accessory downrods, including maximum length and threadlocker requirements.
Minimum clearance for blade tips (30") and blade edge height from floor (7').
Securing the canopy mount to the building structure using wood screws and washers.
Attaching the canopy mount to a fan-rated outlet box with machine screws.
Connecting ceiling wires to the terminal block for single-switch operation.
Connecting ceiling wires to the terminal block for dual-switch operation.
Critical warning: Ensure the fan is properly grounded; stop installation if ground wire is absent.
Connecting the wiring harness from the canopy mount to the fan body's wiring.
Instructions for using the jumper harness for single-switch fan wiring configurations.
Attaching the canopy cover by sliding it over the canopy mount until it clicks securely.
Securing snap-on blades to the pre-installed blade irons using pop locks.
Important notice: Lift fan by housing or downrod, not by wires, to prevent damage.
Remove the cardboard plug guard before connecting the light fixture to the fan.
Connecting the light fixture plugs to the fan plugs, aligning colored markings.
Mounting the light kit by aligning its notch with the fan's mounting bracket pin.
Engaging the locking pin to secure the light fixture by rotating it clockwise onto the fan.
Installing glass shades by loosening thumb screws, positioning glass, and tightening screws.
Critical warning: Ensure glass is properly secured to prevent serious injury or death.
Attaching pull chain pendants to the fan's speed and light fixture's on/off chains.
Fan rotation for updraft (clockwise) creating indirect airflow, useful for warming rooms.
Fan rotation for downdraft (counterclockwise) creating direct airflow for cooling.
Steps to diagnose and fix a fan that is not operating, including checking power and connections.
Troubleshooting steps for excessive fan wobbling, focusing on blade and hanger ball seating.
Tips for resolving noisy fan operation, primarily checking blade installation and condition.
How to obtain warranty service, including required proof of purchase and contact information.
Details on motor (limited lifetime) and other parts (one-year) warranty coverage.
Items and conditions not covered by the warranty, such as labor and cosmetic damage.
Detailed steps for disassembling and reassembling the downrod for length adjustment.
Crucial safety warning regarding fan fall hazards and verifying downrod assembly.
To Next Page
General