9 8
Installation – Pull Chain Pendants
Attach the pull chain pendants to the light and fan pull chains.
The fan pull chain controls the speed: from high to off.
The light pull chain controls the light xture: on and off.
Repeat x2
3g
Installation – Glass Cover
3f3f3e3e
Install a bulb into each of the sockets. When
necessary, replace with bulbs of same
wattage.
To install the glass, rst loosen the thumb
screws. Raise the glass to the light xture.
Tighten all thumbscrews securely.
x3 x3
Glass
Bulb
Screw
GLASS FALL HAZARD
To prevent SERIOUS INJURY or DEATH, make sure that glass
is properly secured.
To Next Page
Loading...
