EasyManua.ls Logo

Hunter Dante - Page 18

Hunter Dante
50 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
1818
18
English
Español
Deutsch
Francais
Italiano
Indonesia
Türkçe
Ελληνικά
11
Slide the downrod ball (A) up the length of the downrod
pipe. Align the downrod pin (B) with the notches in the
downrod ball (A).
Deslice la bola (A) del tubo vertical hacia arriba por la
longitud del tubo vertical. Alinee el pasador (B) del tubo
vertical con las ranuras en la bola (A) del tubo vertical.
Schieben Sie die Hängestabkugel (A) über die Länge des
Hängestabrohres nach oben. Richten Sie den Hängestabstift
(B) nach den Schlitzen in der Hängestabkugel (A) aus.
Faire glisser le globe (A) jusqu'en haut de la tige de
suspension. Aligner la goupille (B) de la tige de suspension
avec les encoches du globe (A).
A
B
10
Far scorrere la sfera (A) per tutta la lunghezza dell'asta.
Allineare il perno dell'asta (B) con le tacche presenti sulla
sfera (A).
Askı borusu topunu (A), askı borusunun uzunluğu boyunca
kaydırın. Askı borusu iğnesini (B), askı borusu topunda (A)
bulunan çentiklerle hizalayın.
Geser bola batang turun (A) naik di sepanjang pipa batang
turun. Luruskan pasak batang turun (B) dengan takik pada
bola batang turun (A).
Σύρετε το σφαιρικό κάλυμμα (Α) της ράβδου ανάρτησης
προς τα πάνω κατά μήκος της ράβδου ανάρτησης.
Ευθυγραμμίστε τον πίρο της ράβδου ανάρτησης (Β) με τις
εγκοπές στο σφαιρικό κάλυμμα της ράβδου ανάρτησης (Α).
Slide the downrod sleeve (A) up the downrod. Insert the
down rod pin (B) into the pin hole (C) on the top of the
downrod.
Deslice la funda del tubo vertical (A) hacia arriba del tubo
vertical. Inserte el pasador del tubo vertical (B) en el orificio
del pasador (C) en la parte superior del tubo vertical.
Schieben Sie die Muffe (A) der Hängestange an der
Hängestange nach oben. Setzen Sie den Hängestabstift (B)
in das Stiftloch (C) oben am Hängestab ein.
Faites glisser le manchon de la tige de suspension (A)
jusqu'en haut de la tige. Insérer la goupille (B) dans le trou
(C) situé sur la partie supérieure de la tige de suspension.
Far scorrere il manicotto dell'asta (A) verso l'alto sull'asta.
Inserire il perno dell'asta (B) all'interno del rispettivo foro
(C) presente nella parte superiore dell'asta.
Askı borusu manşonunu (A), askı borusundan yukarı
doğru kaydırın. Askı borusu iğnesini (B) askı borusunun üst
tarafındaki iğne deliğine (C) yerleştirin.
Geser selongsong batang turun (A) naik pada batang
turun. Masukkan pasak batang turun (B) ke dalam lubang
pasak (C) di bagian atas batang turun.
Σύρετε το περίβλημα της ράβδου ανάρτησης (A) προς τα
πάνω κατά μήκος της ράβδου ανάρτησης. Εισαγάγετε τον
πίρο της ράβδου ανάρτησης (B) στην αντίστοιχη οπή (C) στο
επάνω άκρο της ράβδου ανάρτησης.
B
C
A

Related product manuals