PB
2
For installing the blades
Blade Arm
Blade Arm
Connector
Blade
x6
x6
x6
x18
bag bag
Blade Screw
x18
Grommet
x18
Blade Nut
Do not discard the hardware bags or mix parts from
different bags. Make note of the symbol printed on
each hardware bag. The symbols can be used to
identify the appropriate hardware for each step.
x4
x2
x2
For installing the hanger bracket and wiring the fan
For installing the canopy
bag
Hunter Pro Tip:
Find a part that is missing or damaged?
Don’t take it back to the store. Let us make it right. Visit us at HunterFan.com or call us at 1.888.830.1326.
bag
For your convenience,
you may receive extra fasteners.
Pullchain
bag
Lower Switch Housing
Upper Switch Housing
Canopy
Downrod
Motor
Ceiling Bracket
Wood Screw
WIre Nut
Washer
Fan style may vary.
Note:
M3964-01 r092722
We recommend that you pull everything out of the box and lay it out. We have
grouped the drawn components below with the hardware you’ll need for those
parts. The screws below are drawn to scale to make it easier to identify what
piece of hardware is needed to install each component.
Here is what comes in your box:
x2
Canopy
Screw
x3
x3
bag
Light Kit Screw
Switch Housing
Screw
IMPORTANT
D
I
S
C
A
R
D
K
E
E
P
Remove the
ORANGE shipping
ring from the motor.
Save the screws.
They will be needed
for blade iron
installation.
Blade Arm Screw
x8
bag
To Next Page
Loading...
