GPS TRACKER
The collar has a build-in GPS antenna and the remote control a Bluetooth module. The remote control
communicates with the mobile phone or tablet via Bluetooth. The mobile phone or tablet must be Android
4.4 or later version and Bluetooth version 4 or 5. To synchronize the remote with your mobile, follow these
steps:
1. Download and install the app on your mobile.
2. Turn on the remote control from the switch.
3. Start the application.
4. You will see the picture below (first). Select Start Scan and then tap the Bluetooth icon (second picture) and
you'll go straight to the map.
5. You can see on the map a dog's head indicating the dog's position (the collar must be outdoors facing the sky)
6. By tapping the dog's head on the application you can see the distance between the user and the collar.
The following pictures show how to select the time interval for GPS information, and the buttons of the
remote control on the application. You can select 2 = 60 seconds, 3 = 30 seconds, 4 = 20 seconds, 5 = 15
seconds, 10 = 2 seconds for the GPS info pack.
WARRANTY
We offer 1 year warranty and quick service upon expiry. The warranty does not cover the built-in
rechargeable batteries of the collar and the remote control.
To Previous Page
Loading...
