Hunter Hartland - Hanging the Fan; Aligning Canopy Slots

3
4
1886
1886
Ceiling Bracket Hanging Fan Hanging Fan (Cont.)Wiring Blades Light Glass/Bulbs Pull Chain
Check the outlet box:
Wood Screw
Hanging the Fan
NOTICE
To prevent damage to fan,
ALWAYS lift holding the fan
housing.
Note: To hang the fan, you must tilt the canopy to
an almost vertical position so that the canopy slots
sit on the ceiling plate hooks.
Raise the fan and align the slots in the
canopy with the hooks on the ceiling plate.
Place the slots over the ceiling
plate hooks to hang the fan.
Fan style may vary.
Note:
8”
3/8”
C
U
T
&
S
T
R
I
P
(not to scale)
The wires can be cut, but
leave at least 8” extending
from the top of the canopy.