Hunter Hartland - Assembling the Light Kit; Light Kit Housing Assembly; Light Kit Screws; Installing Bulbs and Glass

7
8
1886
1886
Ceiling Bracket Hanging Fan Hanging Fan (Cont.)Wiring Blades Light Glass/Bulbs Pull Chain
Installing the Bulbs and Glass
x10
Lightly attach the blade arms to the motor with
the blade arm screws, then securely tighten
after both screws are attached.
Repeat x5
Blade Arm Screw
Remember the screws that
you kept after removing the
shipping blocks? You need
them here.
D
I
S
C
A
R
D
K
E
E
P
!
Fan style may vary.
Note:
Installing the Blades:
x15
x15
Insert grommets found in the hardware bag into the
holes in the blades, then secure each blade to a blade arm
with screws found in the hardware bag.
Repeat x5
bag
bag
Blade Screw
Grommet
IMPORTANT
NOTE: Follow the instructions on the blade. Installing it
incorrectly could result in your fan not functioning.
Fan style may vary.
Note:
Assembling the Light