Hunter HEPAtech 30060 - Important Safety Instructions; Introduction

2
44088-01 03/27/2013 © 2013 Hunter Fan Company
IMPORTANT SAFETY INSTRUCTIONS READ ALL
INSTRUCTIONS BEFORE USING THIS AIR PURIFIER
AND SAVE THESE IMPORTANT INSTRUCTIONS
1. ThisAirPurierisdesignedforuseonaat,levelsurfaceandmaynot
workproperlyonanunevensurface.ALWAYSplacethisAirPurieron
arm,levelsurface.ALWAYSplacetheAirPurieratleastsix(6)inches
awayfromwallsandheatsourcessuchasstoves,radiators,orheaters.
2. PlacetheAirPurierinanareathatisoutofthereachofchildren.
3. BeforeusingtheAirPurier,extendthecordandinspectforanysignsof
damage.DONOTusetheproductifthecordhasbeendamaged.
4. Thisproducthasapolarizedplug(onebladeiswiderthantheother)asa
safetyfeature.Thisplugwilltintoapolarizedoutletonlyoneway.Ifthe
plugdoesnottfullyintotheoutlet,reversetheplug.Ifitstilldoesnot
t,contactaqualiedelectrician.DONOTattempttodefeatoroverride
thissafetyfeature.
5. ALWAYSUNPLUGtheAirPurierwhenitisnotinoperation,whilethe
lterisbeingchanged,andwhileitisbeingcleaned.
6. DONOTtiltormovetheAirPurierwhileitisinoperation.Shutoffand
unplugtheunitbeforemoving.
7. DONOTimmersetheAirPurierinwateraspermanentdamagewilloccur.
Referto and follow the CLEANINGAND FILTER REPLACEMENT
instructions.
Introduction
Thank you for purchasing the HEPAtech™ Air Purication System from Hunter Fan
Company. You have purchased our latest development in portable Air Purication
Systems. This system has been developed to improve the quality of the air you
breathe.
Our HEPAtech™ Air Purication System outperforms other air purication systems
by quickly and effectively removing dust, smoke, and pollen particles as small as
.1 microns in size. Room air is pulled in through the front grill and cleaned across
the HEPAtech™ lter. Clean air is then released out the top grill in order to avoid
stirring up settled particles.