Hunter HEPAtech 30060 - Using the Ionizer; Using Your Air Purifier

3
© 2013 Hunter Fan Company 44088-01 03/27/2013
UsingtheIonizer
The ionizer can improve the quality of air in the room. Negative ions are released
into the air, and positively charged dust, smoke, and pollen particles are attracted
to the negative ions. These particles settle out of the air and can be vacuumed
up during normal cleaning. These particles are also more easily captured by the
HEPAtech™ lter as they pass through the HEPAtech™ Air Purication System.
To ensure the best air circulation in the room, we recommend that you place the
air purier six inches away from any walls.
UsingYourAirPurier
1. Remove your air purier from the box and take it out of the clear plastic
protective bag.
2. Place your HEPAtech™ Air Purication System on a rm, at surface.
3. Before turning the Air Purier ‘on’, you need to open the front grill.
To release the front grill, place your ngers behind the tabs and pull forward.
4. The lter will be installed in the correct position. Grasp the lter and pull it
forward. Remove the plastic wrapping and replace the lter in the unit. The
white lter material should be facing outward (towards you) and the wire mesh
side should be hidden from view (inside the unit).
5. Replace the front grill. Be sure that the bottom tabs are in location rst, and
then push the top of the grill forward until it is closed. The unit is now ready
for normal operation. Note: This unit will not operate unless the door is placed
in the correct position.
6. Plug the unit into a 120V electrical outlet.