Hunter HEPAtech 30060 - Cleaning And Filter Replacement; Replacement Filters; How The HEPAtech System Works

5
© 2013 Hunter Fan Company 44088-01 03/27/2013
CleaningAndFilterReplacement
1. Clean the outside of the unit with a soft, damp cloth. The front grill can be
removed and cleaned in soapy water.
2. At least every 90 days, open the front grill, remove the carbon pre-lter, and
replace it. This is necessary to maintain proper odor-removing and overall
ltration performance. If necessary, it can be changed more often. Mark the
new lter installation sticker included with the new carbon pre-lter. Be sure
to remove any plastic wrapping that may be on the new lter before you place
it into the Air Purier.
3. While replacing the pre-lter, you should view the condition of the HEPAtech
Filter. Compare the lter to the color coded chart that is on the inside of the
housing. If the lter matches the dark color on the chart, you should remove
the lter and replace it with a new lter. Be sure to remove any plastic wrap-
ping that may be on the new lter before you place it into the Air Purier.
ReplacementFilters:
To obtain a replacement lter for your Air Purier, call 1-800-4Hunter for your
nearest retailer or Hunter Customer Service at 1-888-830-1326 (Canada 1-866-268-
1936). Please be prepared to tell the operator the model number of your Air Purier
and the model number of the lter you need to replace. You may also contact us
on the internet at www.hunterfan.com
AirPurierMdl.No. FilterMdl.No. Pre-FilterMdl.No.
30060 30932 30901
HowTheHEPAtech
TM
SystemWorks
The above is an illustration of how the HEPAtech air purication system works.
Dust and other irritants are pulled into the air purication system and cleaned
through the HEPAtech Filter. Clean, puried air is then released into the room.