Hunter HEPAtech 30060 - Operating Your Air Purifier; Ionizer Operation; On;Speed Control; Filter Change Calendar

4
44088-01 03/27/2013 © 2013 Hunter Fan Company
OperatingYourAirPurier
Ionizer: Press the button to turn ‘on’ the ionizer. When the ionizer is ‘on’, the
green light near the button will be illuminated.
On/SpeedControl: Rotate the Speed Control knob to set the desired speed. A
setting of zero (0) indicates that the unit is off. One (1) is low speed. Two (2) is
medium speed. Three (3) is high speed. The fan speed may be adjusted at any time.
FilterChange Calendar: The filter counter is designed to optimize the
performance of the air purifer by reminding you when to change the HEPAtech
Filter and pre-lter.
HEPAtechFilterCalendar: The HEPAtech Filter
indicator is located at the top of the calendar ring. To
set the HEPAtech Filter counter, rotate the calendar
ring to align the month that you installed the lter with
the top indicator. Since the lter is designed for 6
months use, the two indicators will serve as reminders
to change the lter every 6 months.
Pre-lter Calendar: The inner knob of the lter
counter is the pre-lter counter. To use, align the
knob with the month that you installed the pre-lter.
The replace symbol on the inner knob points to the
month in which you should install a new pre-lter. The pre-lter is designed for
three months of usage.
Tabs for
opening the
front grill
Front Grill
Pre-lter
HEPAtech Filter
Figure 1
Figure 3 - Calendar Knob